Hanna Instruments hi 99163 Benutzerhandbuch

Seite von 2
Instruction Manual
HI 99163
Portable Waterproof
Meat pH Meter
w w w . h a n n a i n s t . c o m
This Instrument is in Compliance
with the CE Directives
Dear Customer,
Thank you for choosing a Hanna Instruments
Product.
Please read this instruction manual carefully
before using the instrument. This manual will
provide you with all the necessary informa-
tion for the correct use of the instrument.
This instrument is in compliance with the 
directives.
All Hanna Instruments meters are warranted
for two years 
against defects in workmanship
and materials when used for their intended pur-
pose and maintained according to instructions. The
probes are warranted for a period of six
months.
This warranty is limited to repair or replacement
free of charge.  Damage due to accidents, misuse,
tampering or lack of prescribed maintenance are
not covered.
If service is required, contact the dealer from whom
you purchased the instrument. If under warranty,
report the model number, date of purchase, serial
number and the nature of the problem. If the repair
is not covered by the warranty, you will be notified
of the charges incurred. If the instrument is to be
returned to Hanna Instruments, first obtain a Re-
turned Goods Authorization Number from the Cus-
tomer Service department and then send it with
shipment costs prepaid. When shipping any instru-
ment, make sure it is properly packaged for com-
plete protection.
All rights are reserved. Reproduction in whole or in
part is prohibited without the written consent of the
copyright owner.
WARRANTY
PRELIMINARY EXAMINATION
Remove the instrument from the packing ma-
terial and examine it carefully to make sure
that no damage has occurred during ship-
ment. If noticeable damage is evident, notify
your dealer.
Note: Save all packing material until you
are sure that the instrument functions
correctly. All defective items must be
returned in the original packing to-
gether with the supplied accessories.
HI 99163 is a portable pH and temperature
meter with a special probe, dedicated to the
application in slaughter houses.
The  FC 232D probe has been specially de-
signed with a stainless steel blade tip for
meat penetration.
Moreover, a built-in temperature sensor al-
lows simultaneous pH and temperature
readings and a mini amplifier renders mea-
surements impervious to noise and electri-
cal interferences.
The meter is supplied with:
  FC 232D amplified pH/temperature probe
with stainless steel blade tip, DIN con-
nector and 1 m (3.3') cable
  HI 70004 pH 4.01 buffer, 20 mL sachet
  HI 70007 pH 7.01 buffer, 20 mL sachet
  HI 700630 Acid cleaning solution for meat
grease and fats, 20 mL sachet (2 pcs.)
 3x1.5V AA alkaline batteries
• 
instruction manual.
GENERAL DESCRIPTION
SPECIFICATIONS
Range
-2.00 to 16.00 pH
-5.0 to 105.0°C / 23.0 to 221.0°F
Resolution
0.01 pH / 0.1°C / 0.1°F
Accuracy
±0.02 pH
(@20°C/68°F)
±0.5°C up to 60°C; ±1°C outside
±1°F up to 140°F; ±2°F outside
Typical EMC
±0.02 pH
Deviation
±0.2°C or ±0.4°F
Temp. Compensation
Automatic
pH Calibration
Automatic, 1 or 2 point
with 2 sets of standardized buffers
(4.01/7.01/10.01 or 4.01/6.86/9.18)
Probe
 (included)
FC 232D
amplified pH/temperature probe
Battery Type
3 x 1.5V AA / IEC LR6
Battery Life
approx. 1500 hours
Auto-off
after 8 minutes of nonuse
Environment
0 to 50°C; RH 100%
Dimensions150 x 80 x 38 mm (5.9 x 3.2 x 1.5”)
Weight
245 g (8.6 oz.)
Hanna Instruments reserves the right to modify
the design, construction and appearance of its
products without advance notice.
FC 232D
Amplified pH probe with stain-
less steel blade tip, built-in tem-
perature sensor, DIN connec-
tor & 1 m (3.3') cable
HI 70004P
pH 4.01 buffer solution, 20 mL
sachet (25 pcs.)
HI 7004L
pH 4.01 buffer solution, 500 mL
bottle
HI 70006P
pH 6.86 buffer solution, 20 mL
sachet (25 pcs.)
HI 7006L
pH 6.86 buffer solution, 500 mL
bottle
HI 70007P
pH 7.01 buffer solution, 20 mL
sachet (25 pcs.)
HI 7007L
pH 7.01 buffer solution, 500 mL
bottle
HI 70300M
Storage solution, 230 mL bottle
HI 70300L
Storage solution, 460 mL bottle
HI 7061M
General purpose cleaning solu-
tion, 230 mL bottle
HI 7061L
General purpose cleaning solu-
tion, 460 mL bottle
HI 700630P
Acid cleaning solution for meat
grease and fats, 20 mL sachet
(25 pcs.)
HI 70630M
Acid cleaning solution for meat
grease and fats, 230 mL bottle
HI 70630L
Acid cleaning solution for meat
grease and fats, 460 mL bottle
HI 70631M
Alkaline cleaning sol. for meat
grease and fats, 230 mL bottle
HI 70631L
Alkaline cleaning sol. for meat
grease and fats, 460 mL bottle
HI 70632M
Cleaning & disinfection solution
for blood products, 230 mL
bottle
HI 70632L
Cleaning & disinfection solution
for blood products, 460 mL
bottle
HI 710007
Blue shockproof rubber boot
HI 710008
Orange shockproof rubber boot
HI 721312
Hard carrying case
ACCESSORIES
LCD DESCRIPTION
1. Automatic Temperature Compensation
    indicator
2. Stability indicator
3. Battery percentage
4. pH calibration indicator
5. Low battery indicator
6. Selectable temperature unit
7. Secondary display
8. Primary display
9. Measuring unit for primary display
    
ISTR99163   06/03