Hoyt compound-2002 Benutzerhandbuch

Seite von 30
7
This will keep your bow’s string and cables in
good condition.  To assure best results replace D-
75 string and cables when wear is evident or
every two years under normal use conditions.
Insist that Hoyt USA string and cables be used
on your bow.  Beware of lesser quality string and
cables as they may alter the performance of your
bow or cause damage to it.
ECCENTRIC LUBRICATION
A light, spot lubrication of the axles where they
pass through the eccentric should be done on a
regular basis (1,500- 2,000 shots).  In adverse
hunting conditions where dirt, dust or moisture
are encountered, lubrication may be done on a
daily basis.  Hoyt USA recommends you use a
silicone or Teflon based lubrication or any other
quality grease available at your local Hoyt USA
Pro Shop.  It is not recommended that you use
“Penetrating Oils” such as WD-40, EZ-#7, Fast
Break, etc.
BOW PRESS USE
Never
allow your bow to be put into a bow press
unless it is operated by a knowledgeable bow
technician.  Hoyt USA recommends that all nec-
essary adjustments requiring the use of a bow
press be done by an authorized Hoyt Pro Shop.