Honeywell TH6000 Benutzerhandbuch

ENGLISH

•  Press

SYSTEM button to set system to Heat. Make sure the temperature 

is set higher than the Inside temperature.

•  Press

SYSTEM button to set system to Cool. Make sure the temperature 

is set lower than the Inside temperature.

•  Check circuit breaker and reset if necessary.
•  Make sure power switch at heating & cooling system is on.
•  Make sure furnace door is closed securely.
•  Wait 5 minutes for the system to respond.

•  Compressor protection feature is engaged. Wait 5 minutes for the system 

to restart safely, without damage to the compressor (see page 15).