Honeywell HRSD16 Benutzerhandbuch
Operation
104
Turning on the Power
After installing the DVR (see
Chapter 2, Installation
), press POWER on the front panel
to start recording video.
Live Monitoring
As soon as the DVR completes its initialization process, live video shows on the
attached monitor. The default mode is to display all connected cameras at once.
attached monitor. The default mode is to display all connected cameras at once.
To display live video full screen, press that camera button. The input of the chosen
camera displays until you enter another mode.
camera displays until you enter another mode.
To cycle the DVR through the different display formats, press DISPLAY.
The DVR can be set to display full-screen video for a preset dwell time when an Event
occurs. Video from the lowest numbered camera associated with the event sensor is
displayed. The DVR returns to the previous screen format after the event monitoring
dwell time expires. While the event monitoring is activated, the monitoring for all other
subsequent events are ignored.
occurs. Video from the lowest numbered camera associated with the event sensor is
displayed. The DVR returns to the previous screen format after the event monitoring
dwell time expires. While the event monitoring is activated, the monitoring for all other
subsequent events are ignored.
To release the current event monitoring and display the selected camera or to return to
the previous screen format, press individual camera buttons or DISPLAY during event
monitoring.
the previous screen format, press individual camera buttons or DISPLAY during event
monitoring.
10
ALARM Button
11
CLIP COPY Button
12
PANIC Button
13
PLAYBACK Button
14
HDD LED
15
Network LED
16
Power LED
17
USB Connectors
Table 4-1
Front Panel Controls
#
Function
#
Function
#
Function