Honeywell av8or Benutzerhandbuch

 
AV8OR User’s Guide                                                         Appendix 
 

Pub. No D200803000008         Page 7-5     Revision July 2008. 

© Honeywell International Inc. Do not copy without express permission of 

 

The AV8OR will accept external GPS source data via the RS 232 
interface and can be used as a non-certified display of GPS data.  
Below is a list of a few RS 232 GPS units that have been evaluated 
Reminder: The AV8OR only provides for one RS 232 interface. 
 

To configure the AV8OR to receive external position and flight plan 
data, perform the following steps: 

From the Aviation Main Menu, tap the 

 soft key to open the 

System Setup Menu. 
Highlight the Device Setup option and tap the SELECT soft key to 
show the Device and Port Setup page. 
The AV8OR must be set up so that the Position Port is configured as 
“Serial” and the Flight Plan Port is configured as “External”. The type 
must be set as AR-NAV. 
 
On the Device and Port Setup page, the configuration steps are: 

•  If the Weather Source is set to Serial, it must be changed to 

either BlueTooth or None. 

•  Set the Position Port to “Serial”. 

•  Set the Flight Plan Port to “External”. 

•  Set the Position Type to “AR-NAV”. This will change the 

Flight Plan Type to “ENH AR-NAV”. 

When finished the Device and Port Setup page should look 
like Figure 7-1.