Xerox DocuColor 40CP Benutzerhandbuch
7
Setting up the DocuColor 40 CP as a PostScript printer
4.
In your computer’s BIOS settings, set Parallel Port Mode to ECP.
To access the BIOS settings, restart the computer and press the key indicated on your
monitor as soon as the computer starts up. You may have to scroll through several
screens to reach the parallel port settings. After setting the Parallel Port Mode to ECP,
save your changed setting and exit.
monitor as soon as the computer starts up. You may have to scroll through several
screens to reach the parallel port settings. After setting the Parallel Port Mode to ECP,
save your changed setting and exit.
T
O
PREPARE
THE
PRINTER
FOR
PARALLEL
PORT
PRINTING
:
1.
Click the Start button, point to Settings, and click Printers.
2.
Click the DocuColor 40 CP printer icon and choose Properties from the File menu.
3.
Click the Details tab, and in the “Print to the following port” menu, select LPT 1: (ECP
Printer Port).
Printer Port).
N
OTE
:
Check this selection carefully. It may read LPT 1: (Printer Port), which is
not
equivalent to LPT 1: (ECP Printer Port).
If this box does
not
read LPT 1: (ECP Printer Port), change the port setting now, as
described in “To prepare the port for parallel port printing:” on page 9, and then
return to this procedure. You may need your Windows 95 system CD.
return to this procedure. You may need your Windows 95 system CD.
4.
If you changed the selection in the “Print to the following port” menu, click Apply.
A Warning dialog box may appear, stating that fonts you downloaded to the previously
selected port may be lost; click OK.
selected port may be lost; click OK.
5.
Click Spool Settings.