Xerox DocuColor 40CP Benutzerhandbuch

Seite von 82
13
Setting up the DocuColor 40 CP as a PostScript printer
7.
In the Add Port dialog box, verify that the network path is updated and click OK.
You are ready to print from the workstation.
Your print jobs are transmitted to the specified print queue on the Novell file server. 
The DocuColor 40 CP polls the file server, and if jobs are present, they are transmitted 
to the DocuColor 40 CP.
To confirm the connection, you can print a Windows 95 test page.
8.
Click the General tab, and click Print Test Page.
9.
Click OK.
10.
The Job Notes window appears. Type in any information about this job that you want 
and click OK.
Completing the SMB printing connection
If you don’t have a Novell network, you can print via SMB printing (also known as 
Windows printing or WINS printing). Printing by this method allows you to print 
from your computer to a particular print connection (Hold, Print, or Direct) on the 
DocuColor 40 CP.
To set up printing to a second or third print connection, you must install a new printer 
for each connection and repeat the procedure “To set up SMB printing:” on page 15. 
If you install more than one printer, give each a descriptive name during printer driver 
installation, such as 
Astro-Print
 or 
Astro-Hold
, so you can easily identify printers.
B
EFORE
 
YOU
 
BEGIN
:
1.
Configure the DocuColor 40 CP for SMB printing in Network Setup>Service 
Setup>Windows Setup.
SMB printing is referred to as Windows Printing in Setup, on the Control Panel Map, 
and on the Configuration page. For more information, see the Configuration Guide.
2.
Print the DocuColor 40 CP Configuration page.
You need information from the Configuration page to specify settings on your 
computer, such as the Server Name and IP address of the WINS Name Server.
3.
Save any documents in open programs.