Jacuzzi J - LX Benutzerhandbuch

Seite von 68
11
LX Collection
proper ventilation:
• 
 
Proper ventilation should be discussed with 
an engineer or authority competent enough to understand the 
necessary provisions needed to vent moist or heated air and air 
associated with chemical odors outdoors. When the spa is in use 
considerable amounts of moisture will escape, potentially causing 
mold and mildew over time which can damage certain surfaces and/
or surroundings.
sufficient access:
• 
 In the unlikely event that you should ever need 
to access or gain entry to any portion of the spa for servicing, it is 
highly recommended that you plan your indoor installation to provide 
full access to the entire spa.
warranty:
• 
 Damage caused by not following these guidelines or any 
improper installation not in accordance to local codes or authorities is 
not covered under the spas warranty. Please consult your local state 
or city building ordinances.
5.0  General electrical safety Instructions
Your new Jacuzzi spa is equipped with a “state-of-the-art”  
equipment system. It contains the most advanced safety 
and self-protective equipment in the industry. 
Nonetheless, this spa must be installed properly to insure 
dependable usage. Please contact your dealer or local building 
department should you have any questions regarding your installation.
Proper grounding is extremely important. Jacuzzi spas are equipped with 
a current collector system. A pressure wire connector is provided on the 
surface of the control box, located outside the equipment door (Figure 
and any ground metal equipment, metal water pipe or conduit within 5 
feet (1.5m) of the spa, or copper clad grounding rod buried within 5 feet 
(1.5m) of the spa. Bonding wire must be at least No. 8 AWG (8.4 mm²) 
solid copper wire. This is a most important safety assurance feature. 
Before installing this spa, check with the local building department to 
insure installation conforms to local building codes.