Dimplex dfb6016 Benutzerhandbuch

11

Turn the flame action control knob 

to adjust the flame speed control 

to the desired level.
D.  Manual Selection Switch
operates the electric fireplace 

manually.  Pressing the switch up 

(“ 

 

 “ position) once turns on the 

electric fireplace and activates 

Level 1, twice activates Level 2, 

three times activates Level 3.  
Pressing the switch down (“ 

  

 “ position) turns the electric 

fireplace oFF.

:  

The flame effect 

is turned on and the first red 

indicator light illuminates

.

Level 2  :  

The flame effect 

remains on, the heater is 

activated to the low heat 

setting, and the first and 

second red indicator lights 

illuminate

.

Level 3  :  

The flame effect 

remains on, the heater is set 

to the high heat setting, and all 

three red indicators illuminate

.

Cutoff Switch
should the heater overheat, an 

automatic cut out will turn the 

heater off and it will not come 

back on without being reset.  It 

can be reset by switching the 

main on/off switch to off and 

waiting five (5) minutes before 

switching the unit back on.

 CAUTION:  If you need to 

continuously reset the heater, 

unplug the unit and call 

Dimplex north America Limited 

at 1-888-346-7539.

The fireplace is supplied with a 

radio frequency remote control.  

This remote control has a range 

of approximately 50 feet (15.25 

m), it does not have to be pointed 

at the fireplace and can pass 

through most obstacles (including 

walls).  It is supplied with one of 

2,178 independent frequencies 

to prevent interference with other 

units.  The frequency designation 

is indicated on the back of the 

transmitter.
Remote Control Initialization/

Follow steps 1 through 6 to