Zoom MRS-802 Benutzerhandbuch

Seite von 172
 
USAGE AND SAFETY PRECAUTIONS
 
ZOOM MRS-802
 
2
 
SAFETY PRECAUTIONS
 
In this manual, symbols are used to highlight warnings and 
cautions for you to read so that accidents can be prevented. 
The meanings of these symbols are as follows:
 
This symbol indicates explanations about 
extremely dangerous matters. If users 
ignore this symbol and handle the device 
the wrong way, serious injury or death could 
result.
This symbol indicates explanations about 
dangerous matters. If users ignore this 
symbol and handle the device the wrong 
way, bodily injury and damage to the 
equipment could result.
 
Please observe the following safety tips and precautions to 
ensure hazard-free use of the MRS-802. 
 
• Power requirements
 
The MRS-802 is powered by the supplied AC 
adapter. To prevent malfunction and safety hazards, 
do not use any other kind of AC adapter.
When using the MRS-802 in an area with a different 
line voltage, please consult your local ZOOM 
distributor about acquiring a proper AC adapter. 
 
 
• About grounding
 
Depending on installation conditions, a slight 
electrical charge may be felt when touching a metal 
part of the MRS-802. If you wish to avoid this, 
ground the unit by connecting the ground screw on 
the bottom to a good external ground. 
To prevent the risk of accidents, never use one of the 
following for grounding: 
• Water pipe (risk of electric shock) 
•  Gas pipe (risk of explosion) 
• Telephone wiring ground or lightning arrestor (risk 
of lightning stroke) 
 
• Environment 
 
Avoid using your MRS-802 in environments where it 
will be exposed to: 
• Extreme temperature 
• High humidity or moisture 
• Excessive dust or sand 
• Excessive vibration or shock 
 
 
• Handling 
 
The MRS-802 is a precision instrument. Do not exert 
undue pressure on the keys and other controls. Also 
take care not to drop the unit, and do not subject it to 
shock or excessive pressure. 
 
 
• Alterations 
 
Never open the case of the MRS-802 or attempt to 
modify the product in any way since this can result in 
damage to the unit. 
 
 
• Connecting cables and input and output jacks 
 
You should always turn off the power to the MRS-
802 and all other equipment before connecting or 
disconnecting any cables. Also make sure to 
disconnect all cables and the AC adapter before 
moving the MRS-802. 
 
• Volume 
 
Do not use the MRS-802 at a loud volume for a long 
time since this can cause hearing impairment.
 
• CD-R/RW Drive 
 
Never look directly in the laser beam projected from 
the optical pickup of the CD-R/RW drive since your 
sight can be damaged.
 
Warning
 
USAGE AND SAFETY PRECAUTIONS
 
Caution
 
Warning
 
Caution
 
Caution
 
Caution
 
Caution
 
Caution
 
Caution
 
Caution