Denso OFFICE PRO 12 Benutzerhandbuch
18
How to View and Delete Program
1) Press and hold the SET PROG button for 3 seconds or until
beep.
2) To view edited program - While pressing and holding the SET
PROG button, press SET TEMP ( / ) to scroll program
sequence.
PROG button, press SET TEMP ( / ) to scroll program
sequence.
3) To delete a program - Press ENTER and SET PROG buttons
once simultaneously.
once simultaneously.
4) To delete multiple program - Press and hold ENTER and SET
PROG buttons simultaneously.
PROG buttons simultaneously.
How to Run and Stop Program
1) Press RUN/STOP button to activate preset program (LCD
indicates PROGRAM ON). During RUN program, if user push
RESET program run will be terminated, to resume RUN
program user must push RUN/STOP button again.
indicates PROGRAM ON). During RUN program, if user push
RESET program run will be terminated, to resume RUN
program user must push RUN/STOP button again.
2) Press RUN/STOP button to stop program.
1) The unit will return to the previous mode if a program is turned off
while it is running.
while it is running.
2) The LCD continues to indicate PROGRAM ON during program
activating.
activating.
3) Program can be set during power on standby, during unit running,
or during program running.
or during program running.
4) During programming, the unit returns to the previous mode if no
activity occurs within approximately 3 minutes.
activity occurs within approximately 3 minutes.
OPERATION (cont.)
NOTE :