Zoom MRS-1044 Benutzerhandbuch

O] key and

R] key.

The REC [

O] key and PLAY [R] key will light, and

recording on track 2 will begin. Record your guitar playing

while listening to the rhythm song and track 1 play back.

P] key.

The REC [

O] key and PLAY [R] key will go dark, and

recording will end.

U]

R] key.

Tracks 1/2 will be played back together with the rhythm

song. If you want to re-do the recording, repeat steps 2 – 6.

When you are finished recording track 2, use the same

procedure to record other instruments on the remaining

tracks. When you are finished with all recording, save the

project.

When you are finished recording all tracks, you can adjust

the volume balance etc. of the rhythm section and recorder

section, and create a finished song.

◆ Preparations ◆

• Connect a master recorder such as an MD or DAT

recorder to the [OUTPUT] (DIGITAL or MASTER)

jacks.

• Load the project that you saved at the end of step

3-2. Alternatively, you can load the project "Sample

3" (number 994) from the hard disk. When the

MRS-1044 is shipped from the factory, this project

contains pre-recorded performances on all tracks.

(For details on loading a project, refer to p.17.) The

track structure of "Sample 3" is shown below.

Here's how to adjust the volume, pan (stereo left/right

position), and EQ for each channel of the mixer section.

If the INPUT 1/2 [ON/OFF] keys are turned on, any instruments

connected to the [INPUT 1/2] jacks can also be mixed.

Lit

Dark

Rhythm guitar 1

Rhythm guitar 2

Lead guitar

Electric piano

Organ

Synthesizer

Percussion (L/R)

Synth pad (L/R)