Zoom MRS-1044 Benutzerhandbuch

The mixer of the MRS-1044 is divided into two sections:

an "input mixer" that processes the input signals from the

[INPUT 1/2] jacks, and a "track mixer" that processes the

signals from the tracks of the recorder section and from the

rhythm section. Details of each mixer are described below.

■ Input mixer

In the input mixer you can adjust the sensitivity of the

signals that are input from the [INPUT 1/2] jacks, set

various parameters such as pan and send levels to the

send/return effects, and assign the signals to the recorder

tracks.

The parameters that can be adjusted in the input mixer are

listed in the following table.

■ Track mixer

In the track mixer you can process the playback signals of

the recorder tracks (1 – 6, 7/8, 9/10) and the sound of the

drum kit / bass program of the rhythm section, and mix

these signals to stereo. The signal mixed by the track mixer

is output via the MASTER fader from the [OUTPUT]

jacks.

In the track mixer, the signals that are output from each

track are handled in units called "channels." The

parameters that can be adjusted for each channel (DRUM,

BASS, 1 – 6, 7/8, 9/10) are listed in the table below.

The DRUM, 7/8, and 9/10 channels are each stereo

channels that respectively process the output signals from

the drum kit, stereo tracks 7/8, and 9/10. The parameters of

these stereo channels are linked.

Track 9/10

Track 7/8

Track 6

Track 5

Track 4

Track 3

Track 2

Track 1

BASS

DRUM

OUTPUT

Track 9/10

Track 7/8

Track 6

Track 5

Track 4

Track 3

Track 2

Track 1

This section explains the functions and operation of the two mixers built into the MRS-1044.

Volume sent to chorus/delay (send/return effect)

Volume sent to reverb (send/return effect)

Left/right position (L/R channel balance)

Volume of the input signal (position of the [REC LEVEL] control)

Amount of boost/cut for high-range EQ

Frequency at which high-range EQ will boost/cut

Amount of boost/cut for low-range EQ

Frequency at which low-range EQ will boost/cut

Volume sent to chorus/delay (send/return effect)

Volume sent to reverb (send/return effect)

Left/right position (L/R channel balance)

Volume of each channel (fader position)

Link the parameters of the odd/even-numbered channels