Zoom MRS-1044 Benutzerhandbuch

When the project is in its initial state, the insert effect is

sent into the input mixer. However, you may change the

insert location as necessary. The procedure is as follows.

The currently selected insert location will appear in the

display.

The display has the following significance.

• INPUT: Input mixer (default setting)

• DRUM: DRUM channel of the track mixer

• BASS: BASS channel of the track mixer

• TR 1 – TR6: Channels 1 – 6 of the track mixer

• TR1/2, TR3/4, TR5/6, TR7/8, TR9/10: Channels 1/2, 3/4,

5/6, 7/8, or 9/10 of the track mixer

• MASTER: Immediately before the MASTER fader

While the above screen is displayed, you can also select the

insert location by pressing an INPUT 1/2 [ON/OFF] key or a

status key (DRUM, BASS, 1 – 6, 7/8, 9/10, MASTER). When

using the status keys to select channels 1/2, 3/4, or 5/6 as a

pair, press status keys 1/2, 3/4, or 5/6 simultaneously.

You will return to the main screen.

If the [INPUT SOURCE] key is lit when you are in the main

screen, this means that the insert effect is placed in a

location other than in the input mixer.

Normally when the insert effect is placed into the input

mixer, the signal processed by the effect will be recorded on

the track. If necessary, however, you can apply the insert

effect only to the monitor signal, and record the unprocessed

input signal on the track. For example when recording the

unprocessed sound of a vocal performance, the vocalist will

be more comfortable singing if an insert effect suitable for

mic recording is applied to the monitor signal.

For the procedure, refer to the preceding section.

A screen will appear in which you can select an insert

effect patch.

E

R

A screen will appear in which you can select one of the

following two types of signal to be recorded on the track.

• WET: The input signal that has passed through the insert

effect will be recorded on the track (default setting).

• DRY: Only the unprocessed input signal will be recorded

on the track. Even in this case, however, the insert effect

will be applied to the monitor signal.

INPUT

Location at which the insert effect is inserted