Zoom MRS-1044 Benutzerhandbuch

(rhythm song) even if you are not using the rhythm track.

Timing Clock will be transmitted even if the drum and/or

bass tracks are muted (DRUM/BASS status keys dark).

• When using MIDI Timing Clock messages transmitted

from the MRS-1044 to synchronize the operation of an

exter nal MIDI device, you should also tur n on

transmission for Song Position Pointer and

Start/Stop/Continue messages as well as Timing Clock.

• When transmitting Timing Clock from the MRS-1044, we

recommend that you turn the drum/bass MIDI channels

OFF. Synchronization may become unstable if MIDI

messages other than timing clock are also being

transmitted.

You can specify whether Song Position Pointer messages

will be transmitted. Song Position Pointer is a MIDI

message that indicates the current measure position.

Normally it is used in conjunction with Timing Clock.

When the display indicates "SPP," turn the dial to select

one of the following settings.

• ON (transmission on): MIDI Song Position Pointer

messages will be transmitted when a Locate operation is

performed on the MRS-1044 (default setting).

• OFF (transmission off): Song Position Pointer messages

will not be transmitted.

You can specify whether Start/Stop/Continue messages

will be transmitted. Start/Stop/Continue are MIDI

messages that control the transport of a device, causing it

to "run" or "stop." Normally these messages are used in

conjunction with Timing Clock. When the display indicates

"COMMAND," turn the dial to select one of the following

settings.

• ON (transmission on): The appropriate Start/

Stop/Continue message will be transmitted when the

MRS-1044 stops or begins running (default setting).

• OFF (transmission off): Start/Stop/Continue messages

will not be transmitted.