Bay Technical Associates BayTech DS72 Benutzerhandbuch
DS72 Host Module
21
If the password and confirm password do not match, the module will ask you to confirm the password
again. The module displays the following for a matched password:
again. The module displays the following for a matched password:
Delete User
Select D), from the User Management Menu. The Host Module will display the following:
Select D), from the User Management Menu. The Host Module will display the following:
If you select the “admin” user the Module responds with an input error message:
Type the number of the user to be deleted and press <cr>. A successful deletion the Module responds
with User Menu minus the deleted user.
with User Menu minus the deleted user.
SNMP Configuration
Selecting the SNMP Configuration and the Host Module respond:
Depending on the firmware, SNMP Configuration allows the admin to control whether or not a user
has Read/Write access or Read access only. It also allows the admin to control which IP addresses are
allowed to receive a host trap, and simply whether to enable or disable the entire SNMP function.
has Read/Write access or Read access only. It also allows the admin to control which IP addresses are
allowed to receive a host trap, and simply whether to enable or disable the entire SNMP function.
IMPORTANT: You will need some knowledge of SNMP protocols in order to get the Baytech
device to work with your SNMP program. Information provided is for the SNMP Agent only.
Baytech Support will assist with the Agent part only. For SNMP Manger assistance refer to the
vender manual or contact the vender of the SNMP software you are using.
device to work with your SNMP program. Information provided is for the SNMP Agent only.
Baytech Support will assist with the Agent part only. For SNMP Manger assistance refer to the
vender manual or contact the vender of the SNMP software you are using.
NOTE: There are a number of shareware MIB Browsers that can be downloaded from the
internet to make changes and receive traps for a quick verification test.
internet to make changes and receive traps for a quick verification test.
IMPORTANT: To use the SNMP functions you need to download the MIB from Baytech’s
web site,
web site,
www.baytech.net
. Look under Tech Support, Docs and Downloads.
Enter choice, CR to exit.
User name: test
Enter old password (CR if none)>
Enter new password (<= 9 characters)>****
Confirm by re-entering new password>****
User name: test
Enter old password (CR if none)>
Enter new password (<= 9 characters)>****
Confirm by re-entering new password>****
Password change successful.
From menu above, enter number for user to delete>1
Input error: deletion of admin user not allowed.
From menu above, enter number for user to delete>
From menu above, enter number for user to delete>
SNMP Trap Host 1 Address.........1
Where to send Trap messages, 0.0.0.0
SNMP Trap Host 2 Address.........2
Where to send Trap messages, 0.0.0.0
SNMP Trap Host 3 Address.........3
Where to send Trap messages, 0.0.0.0
SNMP Trap Host 4 Address.........4
Where to send Trap messages, 0.0.0.0
SNMP Read-Only Community.........5
Enter READ Community name
SNMP Read-Write Community........6
Enter Write Community name
SNMP Enable......................7
Enable/Disable
Exit.............................X,CR