Bay Technical Associates BayTech DS72 Benutzerhandbuch
DS72 Host Module
30
Select 4), from the probe type menu allows the administrator to set the High and Low Air Flow range.
Option 2 and 4 will enable/disable their corresponding SNMP traps.
Option 2 and 4 will enable/disable their corresponding SNMP traps.
Host Module responds with the new values.
NOTE: the values are given in tenth of a degree, so the below values are 9.9 degrees for the
high value and 6.0 degrees for the low value.
high value and 6.0 degrees for the low value.
NOTE: Selecting the values for the Humidity and Air Flow is the same the Temperature
options.
options.
Status
The option gives the current network status. The Host Module displays the following:
System
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Humidity
Sensor Number: All Name: all RPCs/RPSs Type: Humidity
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Air Flow
Sensor Number: All Name: all RPCs/RPSs Type: Air Flow
1...High Threshold (tenths of meas. unit): NP
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
2...High Threshold Trap Enable: NP
3...Low Threshold (tenths of meas. unit): NP
4...Low Threshold Trap Enable: NP
Enter Request :
RPC/RPS External Environmental Sensor Configuration Menu
Sensor Number: All Name: all RPCs/RPSs Type: Temperature
Sensor Number: All Name: all RPCs/RPSs Type: Temperature
1...High Threshold (tenths of meas. unit): 99
2...High Threshold Trap Enable: Enabled
3...Low Threshold (tenths of meas. unit): 60
4...Low Threshold Trap Enable: Enabled
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
2...High Threshold Trap Enable: Enabled
3...Low Threshold (tenths of meas. unit): 60
4...Low Threshold Trap Enable: Enabled
Enter threshold value in tenths of unit measurement (degrees,%%,etc.):
DS-72 Status Menu.
Enter selection, CR to exit.
1)...System
2)...Network Interface
3)...Logged Users
Enter Request :1
Enter selection, CR to exit.
1)...System
2)...Network Interface
3)...Logged Users
Enter Request :1