Zebra Technologies R110Xi Benutzerhandbuch

128

R110Xi/R170Xi User Guide

23063L-003 Rev. 1 12/6/04

LCD Error Messages

RIBBON IN

Ribbon is loaded, but the printer 
is set for Direct Thermal mode.

• To operate in Direct Thermal mode, remove the 

ribbon.

• To operate in Thermal Transfer mode, leave the 

ribbon loaded and change the print method to 
Thermal Transfer. See 

• Ensure that the printer driver and/or software 

settings are correctly set (if applicable).

HEAD TOO HOT

The printhead is over 
temperature.

Printing automatically resumes when the printhead 
elements cool to an acceptable operating 
temperature.

Caution • The printhead is hot and can 
cause severe burns. Allow the printhead 
to cool.

Caution • Observe proper electrostatic 
safety precautions when handling any 
static-sensitive components such as 
circuit boards and printheads.

CLEAN HEAD NOW

The printhead requires 
cleaning.

Clean the printhead according to the instructions in 

Caution • The printhead is hot and can 
cause severe burns. Allow the printhead 
to cool.

Caution • Observe proper electrostatic 
safety precautions when handling any 
static-sensitive components such as 
circuit boards and printheads.

If the message does not go away after the printhead 
is cleaned, open the printhead and then close it.