Zalman cnps5100(s) Benutzerhandbuch

1. Connect FAN MATE 1 (adjustable fan speed connector) to the 3-pin connector of a fan as

shown in Figure 10.

2. Connect FAN MATE 1 to the 3-pin CPU fan connector of the mainboard.

3. Turn on the computer after assembly is finished.

4. When booting a computer in which FAN Mate 1 is used, an alarm sound may be generated

by a system monitoring program to indicate that the rotation of the CPU fan is slow.

If this happens, you may turn the speed control knob fully clockwise to increase the fan

speed, set

“CPU Fan Detected”to “Disabled”in the BIOS settings, or set the slowest

rotation of the CPU fan in the system monitoring program to less than or equal to 1500RPM.

Note 1) Some mainboards do not boot if the rotation of the CPU fan is below a certain

number of RPM. If the BIOS settings are updated, Silent Mode can be used. For
more information on updating BIOS , please refer to your mainboard manufacturer

’

web site.

5. First check what CPU you are using, then check the CPU compatibility list on page 2. When

the speed control knob is turned fully counter-clockwise, the fan speed is minimum and the
fan operates in silent mode. You can select the desired fan speed by turning the knob.

Note 2) FAN MATE 1 has been specifically designed for the fan of this product.

Zalman Tech. Co., Ltd. is not responsible for any damage to systems or CPUs
caused by using it with other types of fans.

- 6 -

* The specifications of any product may change without prior notice to improve the performance thereof.

For more information on this product, visit our homepage at www.zalman.co.kr.

3-Pin CPUFan Connector

3-Pin Connector of the Fan

Mainboard

FAN MATE 1

Speed Control Knob

djju

ussttiin

g FFa

n S

< Figure 10 >