Konica Minolta pi6500pro pcl6 printer driver Benutzerhandbuch
3
Property Sheets
3-16
Pi6500Pro
Functions of the “Detail Of Output Setting” Dialog Box
Settings can be made for finishing functions including stapling and
folding.
folding.
1. Staple <when Finisher or Booklet Finisher is installed>
This function allows you to staple one set of printed documents at a
time.
time.
m
Right Corner:
Printed documents are stapled at the upper right corner.
Printed documents are stapled at the upper right corner.
m
Left Corner:
Printed documents are stapled at the upper left corner.
Printed documents are stapled at the upper left corner.
m
Right 2 Points:
Printed documents are stapled at two points along the right edge.
Printed documents are stapled at two points along the right edge.
m
Left 2 Points:
Printed documents are stapled at two points along the left edge.
Printed documents are stapled at two points along the left edge.
m
Upper 2 Points:
Printed documents are stapled at two points along the top edge.
Printed documents are stapled at two points along the top edge.
NOTES
è
If “Staple” is set, printed pages are fed out into the Primary Tray.
è
If the capacity of Finisher or Booklet Finisher is exceeded, the stapling
operation may be canceled. Refer to the Operator’s Manual of the
machine.
operation may be canceled. Refer to the Operator’s Manual of the
machine.
è
If you print a document consisting of pages of different sizes in the
same printing job, stapling may be canceled.
same printing job, stapling may be canceled.
è
Take care when printing a document consisting of pages facing
different directions, since the stapling position will be determined by
the direction of the first page.
different directions, since the stapling position will be determined by
the direction of the first page.
è
You cannot set certain sizes or kinds of paper. For details, refer to the
Operator’s Manual of the machine.
Operator’s Manual of the machine.
1
3
2