Konica Minolta bizhub c650 Benutzerhandbuch

Using copy functions

2-10

C650

Usin

g co

py fu

nct

ions

Chapter 2

The zoom ratio can be set in order to make a copy on paper with a size 
different than the document or to enlarge or reduce the size of the copy image.

The zoom ratio can be specified in any of the following ways.

*1

The “Auto Zoom” setting and the “Auto” Paper setting cannot both be 
selected at the same time.
If the “Auto Zoom” was selected at the “Auto Paper Select” setting, the 
Paper screen appears. Touch the button for the desired paper.

*2

When selecting a Reduce setting or a programmed zoom ratio, “Minimal” 
can be selected. Touch [Minimal] to produce a copy with the original image 
slightly reduced (93.0%) and centered in the paper.
The zoom ratio of the “Minimal” setting can be changed (between 90.0% 
and 99.9%). For details, refer to the User’s Guide [Copy Operations].

*3

The programmed zoom ratios can be changed. For details, refer to the 
User’s Guide [Copy Operations].

Follow the procedure described below to specify the Zoom setting.

Auto Zoom

*1

The most appropriate zoom ratio is automatically selected based 
on the size of the loaded document and the specified paper size.

Full Size

A copy that is the same size as the document (100.0%) is 
produced.

Enlarge

The most suitable enlargement zoom ratios for copying from 
common standard document sizes to standard paper sizes are 
preset.

Reduce

*2

The most suitable reduction zoom ratios for copying from 
common standard document sizes to standard paper sizes are 
preset.

Zoom

By using the keypad, a zoom ratio between 25.0% and 400.0% 
can be typed in directly without changing the height-to-width 
ratio.

Set Zoom Ratio

*2*3

Programmed zoom ratios can be recalled to be used again for 
copying.