Behringer Europort EPA40 Benutzerhandbuch
4
EUROPORT EPA40
1.1.2 Initial operation
CAUTION! Before using the apparatus, you must charge the rechargeable battery for at least
four hours. To charge, connect the apparatus to the provided power supply. The CHARGE
LED indicates the battery's status. The battery is fully charged when the LED stops flashing.
four hours. To charge, connect the apparatus to the provided power supply. The CHARGE
LED indicates the battery's status. The battery is fully charged when the LED stops flashing.
Make sure you provide adequate ventilation. Do not place the device on top of a power amplifier or near a
radiator to avoid overheating.
radiator to avoid overheating.
To power the EPA40, use only the power supply unit that is delivered with your equipment.
The battery must not be exposed to extreme heat (sun, open fire and similar risks)! The capacity of the
battery may diminish at low temperatures.
battery may diminish at low temperatures.
Important notes concerning installation: The sound quality may diminish within the range of
powerful broadcasting stations and high-frequency sources. Increase the distance between
the transmitter and the device and use shielded cables for all connections.
powerful broadcasting stations and high-frequency sources. Increase the distance between
the transmitter and the device and use shielded cables for all connections.
CAUTION! The device is capable of producing extreme volume levels. Please keep in mind
that high sound pressure levels not only impair the hearing, but can also cause permanent
damage. Keep the volume at an appropriate level at all times.
that high sound pressure levels not only impair the hearing, but can also cause permanent
damage. Keep the volume at an appropriate level at all times.
1.1.3 Online registration
Please remember to register your new BEHRINGER equipment right after your purchase by visiting
www.behringer.com (alternatively www.behringer.de) and read the terms and conditions of our warranty
carefully.
www.behringer.com (alternatively www.behringer.de) and read the terms and conditions of our warranty
carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible. To
arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should
your BEHRINGER dealer not be located in your vicinity, contact directly one of our subsidiaries.
Corresponding contact information is included in the original equipment packaging (Global Contact
Information/European Contact Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website (www.behringer.com).
arrange for warranty service, please contact the retailer from whom the equipment was purchased. Should
your BEHRINGER dealer not be located in your vicinity, contact directly one of our subsidiaries.
Corresponding contact information is included in the original equipment packaging (Global Contact
Information/European Contact Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website (www.behringer.com).
Registering your purchase and equipment with us helps us process your repair claims quicker and more
efficiently.
efficiently.
Thank you for your cooperation!
2. CONTROL ELEMENTS AND CONNECTIONS
LOUDSPEAKER.
CARRY HANDLE.
HOLES FOR SHOULDER STRAP.
The rotary MIC LEVEL control allows you to adjust the volume level.
The POWER switch turns the device on and off. When turned on, the LED of the POWER switch
lights up.
lights up.
Please note: The POWER switch does not fully disconnect the unit from the mains. To
disconnect the unit from the mains, pull out the main cord plug or appliance coupler. When
installing the product, make sure the plug or appliance coupler is readily operable. Unplug
the power cord when the unit is not used for prolonged periods of time.
disconnect the unit from the mains, pull out the main cord plug or appliance coupler. When
installing the product, make sure the plug or appliance coupler is readily operable. Unplug
the power cord when the unit is not used for prolonged periods of time.
The CHARGE LED flashes yellow as long as the rechargeable battery is charging. It goes out when
the battery is fully charged.
the battery is fully charged.
The LOW BAT LED indicates that the rechargeable battery needs to be charged.
2. CONTROL ELEMENTS AND CONNECTIONS