Behringer Europort EPA40 Benutzerhandbuch
7
EUROPORT EPA40 User Manual
(9)
You can connect an external sound source (CD player,
MP3 player, etc.) to the LINE IN input.
MP3 player, etc.) to the LINE IN input.
DC IN 18V 3A
(1)
(3)
(2)
(3)
(11)
(8)
(5)
(4)
(9)
(7) (6)
(10)
Fig. 2.1: Side view of the EPA40
(10)
Connect to the power supply via the polarized DC IN connector.
A fitting power adapter is supplied. Use the device only with the
included power supply.
A fitting power adapter is supplied. Use the device only with the
included power supply.
(11)
COMPARTMENT FOR BATTERY AND SHOULDER STRAP.
To insert the battery, open the compartment’s cover.
The bottom half of the compartment is used for the battery.
Open the latch to access the battery compartment.
Insert the battery as follows: The terminals must face the device
with the positive terminal (red) on the side of the EPA control
panel (to the left, as seen from the rear panel). Insert the
battery and close the latch. Close the battery compartment.
To insert the battery, open the compartment’s cover.
The bottom half of the compartment is used for the battery.
Open the latch to access the battery compartment.
Insert the battery as follows: The terminals must face the device
with the positive terminal (red) on the side of the EPA control
panel (to the left, as seen from the rear panel). Insert the
battery and close the latch. Close the battery compartment.
◊ Insert the rechargeable battery with the terminals
connected to the correct polarity.
◊ Remove the rechargeable battery when the device is not to
be used for a long period. Store the rechargeable battery in
an upright position (with the terminals facing upward).
an upright position (with the terminals facing upward).
The device’s SERIAL NUMBER is found on the bottom side of the unit.
3. Specifications
Inputs
MIC IN
¼" TRS jack, unbalanced
LINE IN
1/8" jack, unbalanced
Output
Output power
40 W
Loudspeaker
5" full-range speaker
Microphone
Type
BEHRINGER XM1800S,
dynamic
Pickup pattern
Hyper-cardioid
Cable length
3' spiral cable
System Data
Power supply
with built-in
rechargeable battery
Rechargeable battery type
12 V DC / 2600 mAh
Charging time
approx. 4 h
Battery operating time
up to 8 h
External recharger type
18 V DC / 3 A
Mains voltage
100 - 240 V~, 50/60 Hz, 1.5 A
(Switching mode adaptor)
Mains connector
Standard IEC receptacle
Physical/Weight
Dimensions (H x W x D)
approx. 8.5 x 7.1 x 11.2"
approx. 217 x 180 x 284 mm
Weight (without power supply) approx. 7 lbs / 3.20 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.