Navigon 7310 Benutzerhandbuch

Seite von 79
User’s manual NAVIGON 7310 
Before you begin 
- 14 - 
The following memory media can be used in the NAVIGON 7310
► 
microSD cards 
Removing the memory card 
1.  Switch off the navigation device. To do so, press the 
 (On/Off
key. 
2.  Press the memory card gently into the device until the lock 
disengages. 
3.  Let go of the memory card. It will now project slightly out of the 
device. 
4.  Pull the memory card out of the slot. 
Inserting a memory card 
 
1.  Insert the memory card into the device. (See illustration.) 
2.  Press the card into the device until it locks into place. 
 
Note: The navigation device will work only if the memory card contains 
the navigation software and map data. 
 
2.6 
Navigating with GPS 
GPS is based on a total of at least 24 satellites orbiting the Earth and 
continuously transmitting signals of their position and time. The GPS 
receiver receives this data and calculates its own geographical position 
on the basis of the information transmitted by the various satellites. 
Data from at least three satellites is required for positioning with an 
acceptable degree of accuracy. With data from four or more satellites it 
is possible in addition to determine the position's altitude above sea 
level. Positioning is accurate to within three metres. 
Once the navigation device has determined your position, this position 
can be used as a starting point for calculating a route. 
The map data on your navigation device includes the geographical 
coordinates of all digitally recorded points of interest, streets and