Konica Minolta ip421ev211 Benutzerhandbuch
Chapter 6 Printer EKC
6-2 Print Controller INSTRUCTION MANUAL
■ Overview of the Printer EKC
Printer EKC is a feature use to manage the number of prints on the copier.
Provided the previously established password is entered,the Printer EKC feature counts printouts
and determines when a preset limit has been reached.
The Printer EKC feature also rejects print requests from a client without a valid password.
● Setting of Printer EKC
A password for Printer EKC and its counter are set in the copier’s key operator settings. For guidance
in setting Printer EKC, refer to the copier INSTRUCTION MANUAL.
A password for Printer EKC has to be the same as User ID to enter at printing out time.
● Printing with Printer EKC
Once the Printer ECM has been set appropriately,perform the following steps to print.
1.
Select the [Paper] tab in the printer driver properties window, and click the [Settings]
key.
[Password Print Settings] dialog will appear.
2.
Type in the user ID set up in Printer EKC into the User ID text box.
You must enter the same password (5 digits or less) in the User ID text box that you set
up on the copier for Printer EKC.
If you do not enter the correct password or if you leave the User ID text box blank, the
print job is not performed and is registered as Unsuccessful jobs. When in doubt about
the password for Printer EKC, ask your system administrator.
3. Click [OK] to close the Properties and start the printing process.