bk avr317 Benutzerhandbuch

 

35

Set the intensity of on-screen video overlays - Overlays will appear when you change a receiver setting or 
your receiver detects a change in the incoming audio or video information. Transparent mode allows video to be 
seen behind the overlay. 

 

From Remote 

From Front Panel 

Action 

1 

À(PAUSE) or §(STOP) 

(UP) or (DOWN) 

move to Overlay 

2 

¶

(REW) or

 •

(FF) 

VOLUME KNOB 

change overlay type 

 
Set the background color for your on-screen display menus - 

 

From Remote 

From Front Panel 

Action 

1 

À(PAUSE) or §(STOP) 

(UP) or (DOWN) 

move to Background Color 

2 

¶

(REW) or

 •

(FF) 

VOLUME KNOB 

change background color 

 
Set your Zone 1 monitor video operation - More than likely you have a composite or S-VIDEO monitor, which 
will be used to view your selected source’s video. Your receiver has the capability to process BOTH composite 
video and S-VIDEO simultaneously. Your receiver DOES NOT convert between composite video and S-VIDEO.  
 
In MANUAL mode your receiver will always send both composite video and S-VIDEO to your Zone 1 monitor. 
When your receiver first detects video on a selected source it checks to see if it is composite or S-VIDEO or both. 
It then shows a message, which displays the current status as to the incoming video ‘Composite’, ‘S-VIDEO’ or 
‘Both Video’, to both video outputs. When no video is available on one of the video formats (composite or S-
VIDEO), it will send its internal background screen to the monitor and then prompt you if there is video available 
using the other video format.  

 

In AUTO mode, your receiver will look for S-VIDEO on the selected source. If it finds S-VIDEO it will send it to 
your Zone 1 monitor. Your receiver will also look for composite video on the selected source. If it finds composite 
video it will send it to your Zone 1 monitor. If it finds no S-VIDEO on the selected source it will send no video. 
Similarly if it finds no composite video on the selected source it will send no video. This allows for the use of your 
Monitor’s auto video detection circuit (if available) to select the proper video format for your viewing.  

OVERLAY OP BRIGHT

DISPLAY    GREY