DFI G586SP Benutzerhandbuch
G586SP/G586SP AIO
24
To install a CPU, do the following.
1. Make sure the handle on the side of the ZIF socket is up.
To raise the handle, push it down, slightly pull it out to
the side, then raise it as far as it will go. The top plate
will slide back. Do not use screwdrivers or other tools to
open the socket, or you may damage the system or
socket. It may be necessary to initially apply a small
amount of sideways force to free the handle from its
retaining “tab.” Once clear of the “tab,” the handle will
open relatively easily.
the side, then raise it as far as it will go. The top plate
will slide back. Do not use screwdrivers or other tools to
open the socket, or you may damage the system or
socket. It may be necessary to initially apply a small
amount of sideways force to free the handle from its
retaining “tab.” Once clear of the “tab,” the handle will
open relatively easily.
Installation Procedure
2. Once the lever is completely up, remove the old CPU by
carefully lifting it straight out of the socket. You are now
ready to insert the new CPU.
ready to insert the new CPU.