DFI G586SP Benutzerhandbuch
G586SP/G586SP AIO
47
Save & Exit Setup
When all the changes have been made, highlight “Save &
Exit Setup” and press <Enter>. The message below will
appear:
Exit Setup” and press <Enter>. The message below will
appear:
Save to CMOS and Exit (Y/N)? N
Type “Y” and press <Enter>. The following message will
appear:
appear:
Reboot System (Y/N)? N
Type “Y” and press <Enter>. The modifications you have
made will be written into the CMOS memory, and the system
will reboot. You will once again see the initial diagnostics on
the screen. If you wish to make additional changes to the
setup, press <Ctrl> <Alt> <Esc> simultaneously or <Del.>
after memory testing is done.
made will be written into the CMOS memory, and the system
will reboot. You will once again see the initial diagnostics on
the screen. If you wish to make additional changes to the
setup, press <Ctrl> <Alt> <Esc> simultaneously or <Del.>
after memory testing is done.
Exit Without Saving
When you do not want to save the changes you have made,
highlight this option and press <Enter>. The message below
will appear:
highlight this option and press <Enter>. The message below
will appear:
Quit Without Saving (Y/N)? N
Type “Y” and press <Enter>. The system will reboot and you
will once again see the initial diagnostics on the screen. If
you wish to make any changes to the setup, press <Ctrl>
<Alt> <Esc> simultaneously or <Del.> after memory testing
is done.
will once again see the initial diagnostics on the screen. If
you wish to make any changes to the setup, press <Ctrl>
<Alt> <Esc> simultaneously or <Del.> after memory testing
is done.