Bush Hog 2446 Benutzerhandbuch

D.  With  tractor  at  idle  speed,  carefully  activate

boom  cylinders  to  raise/lower  cross  tube  until  it
aligns with front bracket channel.

E.  Drive  tractor  forward  until  cross  tube  fully

engages  front  bracket  channel  and  install  front
bracket pin. (Figure 2-3)

Figure 2-3            Front Bracket Pin

F.  Extend  bucket  cylinder  (dump)  until  subframe

rest on rear bracket.

G. Install cuff per Figure 2-4 as shown for model

loader being mounted.

H. Tighten nut retaining cuff to 100 ft./lbs.

I. Raise boom, remove parking stands and slide

into loader frame for storage. Retain parking stands
with pins during storage. (Figure 2-5)

Figure 2-4 Cuff Arrangement

Figure 2-5        Parking Stand Storage

Fully Insert Stands And Pin Into Place

11

FIXED
PIVOT PIN

Cuff With Welded-On Bolt

Removable

Pin

Cuff

Square Head Bolt