Linksys USB300M Benutzerhandbuch

Seite von 31
Chapter 2
Configuration
4
USB Ethernet Adapter
Chapter 2:  
Driver Installation
This chapter will take you through all the steps necessary 
to install the driver for the USB 2.0 Ethernet Adapter. After 
physically  connecting  the  Adapter  to  your  computer’s 
USB  port  or  hub,  follow  these  instructions  to  install  the 
hardware  device  driver.  The  installation  procedures  for 
the  hardware  device  driver  vary  depending  on  your 
computer’s operating system, so make sure to follow the 
instructions  for  your  operating  system.  The  instructions 
also  may  vary  slightly  depending  on  your  current 
operating system’s configuration. If at any time during the 
installation  you  encounter  problems,  refer  to  Appendix 
A:  Troubleshooting
page 9
.
NOTE:
 Throughout this user guide, it is assumed 
that “D” is the letter of your CD-ROM drive.
Driver Installation for Windows XP and 
Windows 2000
NOTE:
 Do not click Cancel at any time during 
the  installation  process.  Doing  so  will  prevent 
your  driver  from  being  properly  installed  on 
your computer.
If you have not yet done so, start your computer.
1. 
Connect  the  Adapter  to  your  computer.  Refer  to 
2. 
Installing the Adapterpage 3.
The  operating  system  will  automatically  detect  the 
3. 
Adapter  and  display  the  Welcome  to  the  Found  New 
Hardware  Wizard  screen.  Select  No,  not  this  time 
when asked to connect to Windows Update. Then click 
Next.
Welcome to the Found New Hardware Wizard
Insert the Installation CD into your computer’s CD-ROM 
4. 
drive  and  select  Install  the  software  automatically 
(Recommended)
. Then click Next.
Insert the Installation CD
If  the 
5. 
Cannot  Install  this  Hardware  screen  appears, 
perform  steps  5a  through  5c  below.  Otherwise, 
continue directly to step 6.
Cannot Install this Hardware
Click 
a. 
Back  to  return  to  the  previous  screen  (refer 
to step 4).
Select 
b. 
Install  from  a  list  or  specific  location 
(Advanced), and then click Next.
Select 
c. 
Search  for  the  best  driver  in  these 
locations and Search removable media (floppy, 
CD-ROM...)
, and then click Next.
Choose your search and installation options