Cadillac seville 2002 Benutzerhandbuch

Suppose you set your cruise control at a desired speed
and then you apply the brake. This shuts off the cruise
control. But you don’t need to reset it.

Once the vehicle is traveling approximately 
25 mph (40 km/h) or more, you can press RES/ACC
(resume/accelerate) to return to your desired preset
speed. The CRUISE light will be displayed again.

The vehicle will return to and stay at your preset speed.
If you press and hold RES/ACC, the vehicle speed 
will increase until you release the button or apply 
the brake. Unless you want to go faster, do not press 
and hold RES/ACC.

There are two ways to go to a higher speed:
D Use the accelerator pedal to get to the higher speed.

Press SET/CST, then release it and the accelerator
pedal. You will now cruise at the higher speed.

D Press RES/ACC. Hold it there until you get up 

to the speed that you want, and then release it. 
To increase your speed in very small amounts,
briefly press RES/ACC and then release it. 
Each time you do this, your vehicle will speed up
approximately 1 mph (1.6 km/h) faster.

The accelerate feature will only work after you have set
the cruise control speed by pressing SET/CST.

There are two ways to reduce your speed while using
cruise control:
D Press SET/CST until you reach the lower speed 

you want, then release it.

D To slow down in very small amounts, press

SET/CST briefly. Each time you do this, the vehicle
will slow down approximately 1 mph (1.6 km/h).

Use the accelerator pedal to increase your speed. When
you take your foot off the pedal, your vehicle will slow
down to the cruise control speed you set earlier.