Lasko 3520 Benutzerhandbuch

Seite von 2
FUCIONAMIENTO
1.  Retire con cuidado el Ventilador de la bolsa.
2.  Coloque el Ventilador en una superficie firme y nivelada.
ADVERTENCIA: Los topes de plástico o de goma, como los pies de esta 
unidad, pueden adherirse a la superficie de muebles y/o pisos de madera 
dura. La unidad puede dejar un residuo que podría oscurecer, manchar o 
producir defectos permanentes en la terminación de ciertas superficies de 
muebles y/o pisos de madera dura.
3.  Conecte  el  cable  a  un  tomacorrientes  eléctrico  de  120  V~. 
Asegúrese  que  el    enchufe  se  introduzca  firmemente  en  el 
tomacorrientes.
4.  Encienda el Ventilador seleccionando la velocidad deseada con la Perilla 
de Encendido situada al costado del Ventilador. (Figura 1)
   0 – Apagado
   3 - Alta
   2 - Mediana
   1 - Baja
5.Para ajustar la direccion del aire, simplemente jire la cabeza 
del Ventilador. 
6. La cremallera con un adjuste de mantendra el Ventilador en la posicion deseada.
EL ENSAMBLE DE LA CREMALLERA EN EL “CYCLONE” ESTA DISENADA 
PARA QUE TRABE EN CADA POSICION.  ASI QUE CUANDO AJUSTE EL 
ANGULO DEL VENTILADOR OIRA UN SONIDO LO CUAL ES NORMAL.
7.  Para girar el Ventilador APAGAR, girar la Perilla de la Poder/Velocidad 
a APAGAR (0) y quitar la unidad de la salida eléctrica.
MANTENIMIENTO
ADVERTENCIA: SIEMPRE DESCONECTE EL CABLE ANTES DE MOVER 
O REPARAR.
ADVERTENCIA: ¡NO SUMERJA EL VENTILADOR EN AGUA!
LIMPIEZA: Limpie las aberturas de toma y escape del Ventilador con el 
accesorio de cepillo de su aspiradora. Esto quitará el polvo y las pelusas 
que  pudieran  acumularse  con  el  tiempo.  NO  INTENTE  DESARMAR  EL 
VENTILADOR. Limpie el cuerpo del Ventilador con un paño suave. 
CUIDADO:  No  use  gasolina,  bencina,  thinner  (removedor),  limpiadores 
fuertes, etc. ya que pueden dañar el Ventilador.  NUNCA use ALCOHOL 
O SOLVENTES.
REPARACIONES:
 
Para cualquier reparación, que no sea de mantenimiento 
general  por  parte  del  usuario,  por  favor  contacte  a  nuestro  equipo  de 
Servicio  al  Cliente  al  (800)  233-0268  de  Lunes  a  Viernes  de  8  a.m.  a  5 
p.m.
ALMACENAJE: Guarde el Ventilador, con estas instrucciones, en la caja 
original en un lugar fresco y seco.
1.  Read all instructions before using Fan.  
2.  Make certain that the power source conforms to the electrical 
requirements of the Fan.
3.  Use this Fan only as described in this manual.  Any other use 
not recommended by the manufacturer may cause fire, electrical 
shock, or injury to persons.
4.  To reduce the risk of personal injury and electric shock, the Fan 
should not be played with or placed where small children can reach it.
5.  Unplug power cord before installing, servicing, or moving 
the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS 
THE  SOLE  MEANS  OF  DISCONNECTING  POWER  WHEN  IN-
STALLING  OR  SERVICING  THE  FAN.    ALWAYS  UNPLUG  THE 
POWER CORD.
6.  This  Fan  must  NOT  be  used  in  potentially  dangerous 
locations such as flammable, explosive, chemical-laden 
or wet atmospheres.
7.  DO NOT use Fan in or near a window.  Rain may create an 
electrical hazard.
8.  Completely assemble Fan, according to instructions, before 
connecting to power supply.
WARNING:  THIS  APPLIANCE  HAS  A  POLARIzED  PLUG  (ONE 
BLADE IS WIDER THAN THE OTHER).  TO REDUCE THE RISk 
OF ELECTRIC SHOCk, THIS PLUG IS INTENDED TO FIT IN A 
POLARIzED OUTLET ONLY ONE WAY. MATCH WIDE BLADE OF 
PLUG TO WIDE SLOT, FULLY INSERT. IF THE PLUG DOES NOT 
FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL 
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN. DO NOT 
ATTEMPT TO DEFEAT THIS SAFETY FEATURE.
WARNING:  THIS  PLUG  IS  A  SAFETY  FEATURE.  IT  CONTAINS 
A SAFETY DEVICE (FUSE) THAT SHOULD NOT BE REMOVED. 
DISCARD PRODUCT IF THE ATTACHMENT PLUG IS DAMAGED. 
TO  REDUCE  THE  RISk  OF  FIRE,  ELECTRIC  SHOCk  AND 
PERSONAL  INJURY,  DO  NOT  REMOVE,  REPLACE,  REPAIR 
OR  TAMPER  WITH  THE  ORIGINALLY  SUPPLIED  PLUG.  IF 
THE  FAN  DOES  NOT  FUNCTION  PROPERLY,  IT  MAY  BE  DUE 
TO  THE  SAFETY  DEVICE  INCORPORATED  IN  THIS  PLUG. 
CALL  800-233-0268,  MONDAY  -  FRIDAY,  BETWEEN  8:00  A.M. 
AND  5:00  P.M.  EASTERN.  IF  THE  PLUG  WARNING  LABEL  IS 
MISSING OR DAMAGED, CALL THE TOLL FREE NUMBER FOR 
A REPLACEMENT LABEL.
9.  Where possible, avoid the use of extension cords.  If they must 
be used, minimize the risk of overheating by ensuring that they 
are UL listed.  Never use a single extension cord to operate more 
than one Fan. Do Not plug Fan into cord reel.
10. NEVER operate any Fan with a damaged cord or plug or after 
the Fan malfunctions, has been dropped or damaged in any 
manner.  
11.Do not insert or allow fingers or foreign objects to enter any 
ventilation or exhaust opening as it may cause an electric shock 
or fire, or damage the Fan.  Do not block or tamper with the Fan 
in any manner while it is in operation. 
12.Always  place  the  Fan  on  a  stable,  flat,  level  surface  when 
operating, to avoid the chance of the Fan overturning. Locate 
the Power Cord so the Fan or other objects are not resting on it. 
Do not run cord under carpeting. Do not cover cord with throw 
rugs,  runners,  or  similar  coverings.  Do  not  route  cord  under 
furniture or appliances. Arrange cord away from traffic area and 
where it will not be tripped over.
13.This  Fan  is  not  intended  for  use  in  wet  or  damp  locations.  
Never locate a Fan where it may fall into a bathtub or other water 
container.
14. Do not use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities including 
areas where livestock, poultry or other animals are confined. 
Please  refer  to  National  Electric  Code  (NEC)  Article  547-7 
(2008), or applicable state or local codes or standards relating 
to electrical requirements for Agricultural Buildings. THIS FAN 
DOES  NOT  MEET  THE  REQUIREMENTS  OF  NEC  ARTICLE 
547-7 (2008).
16.This Fan is not suitable for use in hazardous locations. Please 
refer to National Electric Code (NEC) Article 500 or applicable 
state  or  local  codes  or  standards  relating  to  electrical 
requirements for Hazardous locations. THIS FAN DOES 
NOT  MEET  THE  REQUIREMENTS  OF  NEC  ARTICLE  500 
(2008).
 
WARNING:
 
REDUCE THE RISk OF FIRE OR ELECTRIC 
SHOCk  –  DO  NOT  USE  THIS  FAN  WITH  ANY  SOLID 
STATE SPEED CONTROL DEVICES.
This Fan is for residential use only. 
It is not intended to be used in commercial, industrial or agricultural settings.
GENERAL SAFETY INFORMATION
When using electrical appliances, 
basic precautions should always be followed 
to reduce the risk of fire, electric shock and injury to persons, 
including the following:
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.  PRO-
TECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.  FAILURE TO COMPLY WITH  
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.  
IMPORTANT  INSTRUCTIONS - 
OPERATING MANUAL
SAVE THESE INSTRUCTIONS
20" CYCLONE
®
 
PIVOTING 
FLOOR FAN
MODEL 3520
MODELO 3520
Figura 1
2085398
4
Rev. G 8/10
2085398
1
Rev. G 8/10
GARANTÍA LIMITADA DE LASkO PRODUCTS, INC.
(NO VÁLIDO EN MÉXICO)
QUÉ CUBRE ESTA GARANTÍAS:  Este producto está garantizado contra defectos de mano de obra y/o materiales.
CUÁNTO DURA ESTA GARANTÍA:  Esta garantía se extiende únicamente al comprador original del producto y dura uno (1) año  a partir de la fecha 
original de compra o hasta que el comprador original del producto venda o transfiera el producto, cualesquiera de ambas que ocurriera en primer lugar.
QUÉ HARÁ LASkO:  Durante el período de garantía, Lasko, a opción propia, reparará o reemplazará cualquier parte o partes que demuestren ser 
defectuosas o reemplazará el producto completo por el mismo modelo u otro comparable.  
QUÉ NO CUBRE ESTA GARANTÍA:  Esta garantía no tiene validez si el producto fue dañado o falló debido a un accidente, manipulación u 
operación inadecuadas, daño en el envío, abuso, mal uso, reparaciones no autorizadas hechas o el intento de hacerlas.  Esta garantía no cubre 
los costos de envío para la devolución de productos a Lasko para su reparación o reemplazo.  Lasko abonará los cargos de envío de devolución 
a Lasko con posterioridad a las reparaciones o el reemplazo bajo garantía. 
CUALESQUIERA  Y  TODAS  LAS  GARANTÍAS,  EXPLÍCITAS  O  IMPLÍCITAS  (INCLUYENDO,  SIN  LIMITACIÓN,  CUALESQUIERA  GARANTÍA 
IMPLÍCITA DE COMERCIABILIDAD), DURAN UNO AÑO A PARTIR DE LA FECHA ORIGINAL DE COMPRA O HASTA QUE EL COMPRADOR 
ORIGINAL DEL PRODUCTO VENDA O TRANSFIERA EL PRODUCTO, CUALESQUIERA DE AMBAS QUE OCURRIERA EN PRIMER LUGAR 
Y  EN  NINGÚN  CASO  LA  RESPONSABILIDAD  DE  LASkO  BAJO  CUALQUIER  GARANTÍA  EXPLÍCITA  O  IMPLÍCITA  INCLUIRÁ  (I)  DAÑOS 
INCIDENTALES O POR CONSECUENCIA POR CUALQUIER CAUSA QUE FUERE, O (II) REEMPLAzO O REPARACIÓN DE CUALESQUIERA 
FUSIBLES HOGAREÑOS, CORTA-CIRCUITOS O TOMACORRIENTES.  INDEPENDIENTEMENTE DE CUALQUIER DECLARACIÓN CONTRARIA, 
EN NINGÚN CASO LA RESPONSABILIDAD DE LASkO BAJO CUALQUIER GARANTÍA EXPLÍCITA O IMPLÍCITA PODRÁ EXCEDER EL PRECIO 
DE COMPRA DEL PRODUCTO Y DICHA RESPONSABILIDAD TERMINARÁ AL VENCIMIENTO DEL PERÍODO DE GARANTÍA.
Algunos estados y provincias no permiten limitaciones sobre la duración de una garantía implícita, o sobre la exclusión o limitación de los daños 
incidentales o por consecuencia, por lo tanto dichas exclusiones o limitaciones podrían no aplicarse en su caso.  Esta garantía le otorga a usted 
derechos legales específicos.  Usted también podría tener otros derechos que varían de estado en estado y de provincia en provincia. 
Se requiere prueba de compra antes que se acepte un reclamo bajo garantía. 
SERVICIO AL CLIENTE:
Línea gratuita (800) 233-0268. Correo electrónico: producthelp@laskoproducts.com
Nuestro equipo de Servicio al Cliente está disponible para ayudarle con preguntas sobre productos, ubicaciones de los centros de 
reparación y repuestos. Se puede comunicar con nuestro equipo de Servicio al Cliente  de lunes a viernes, de 8 a.m. a 5 p.m. hora del Este. 
Por favor tenga disponible el número de modelo, así como también el tipo y estilo 
(ubicados en la parte inferior de su producto). 
Customer Service Dept., 820 Lincoln Ave., West Chester, PA 19380
(Por favor no envíe el producto a esta dirección) www.laskoproducts.com
PARA MONTAR EN LA PARED:
ESTE  VENTILADOR  se  DEBE  MONTAR  EN  UNA  SUPERFICIE  PLANA 
ESTRUCTURALMENTE SOLIDA.
Sólo uso #6-32 X 1" tornillos para montar este Ventilador. La longitud del 
tornillo debe ser lo suficientemente larga para ajustarse al clavo pared. Si 
un clavo no puede ser montado ni si el Ventilador se monta en una pared 
utilice unas anclas mas covenientes para este tipo de montaje.
Al montar el Ventilador a la pared, el conjunto de cuerda se debe localizar 
entre el Cuerpo del Ventilador y la Yunta del Ventilador. 
(Figura 2)
Yunta De
Ventilador
El Cuerpo De 
Ventilador
Figura 2