Fortinet fortigate-100a Benutzerhandbuch
System virtual domain
Adding a virtual domain
FortiGate-100A Administration Guide
01-28007-0068-20041203
135
See the following procedures for configuring virtual domains:
•
•
•
•
•
•
•
•
•
•
•
Adding a virtual domain
To add a virtual domain
1
Go to System > Virtual domain.
2
Select Create New.
3
Enter a virtual domain Name.
The virtual domain must not have the same name as a VLAN or zone.
The virtual domain must not have the same name as a VLAN or zone.
4
Select OK.
Selecting a virtual domain
The following procedure applies to NAT/Route and Transparent mode.
To select a virtual domain to configure
1
Go to System > Virtual domain > Virtual domains.
2
Select Change following the current virtual domain name above the table.
3
Choose the virtual domain to configure.
4
Select OK.
The footer of the web-based manager page displays the selected virtual domain name
if the information and configuration options on the page are exclusive to the virtual
domain. Otherwise, the footer displays “Virtual Domain: all”. See
The footer of the web-based manager page displays the selected virtual domain name
if the information and configuration options on the page are exclusive to the virtual
domain. Otherwise, the footer displays “Virtual Domain: all”. See
Selecting a management virtual domain
In NAT/Router mode, you select a virtual domain to be used for system management.
In Transparent mode, you must also define a management IP. The interface that you
want to use for management access must have Administrative Access enabled. See
In Transparent mode, you must also define a management IP. The interface that you
want to use for management access must have Administrative Access enabled. See