Fortinet fortigate-100a Benutzerhandbuch

Select Enable.

In the Source IP 1 field, type the private IP address or subnet address from which 
traffic may originate locally (for example, 192.168.20.12 or 192.168.20.0 

respectively).

In the Destination IP 1 field, enter the IP address of a remote computer:
• For a peer-to-peer configuration, the destination address is the private IP address 

of a server or host behind the remote VPN peer (for example, 172.16.5.1/32).

• For a dialup-client or Internet-browsing configuration where the remote VPN client 

is configured to acquire a virtual IP address, the destination address must 
correspond to the virtual IP address that can be acquired.

If you want to enable a second ping generator, repeat Steps 3 and 4 for the Source IP 
2 and Destination IP 2 settings.

Select Apply.

You can use the monitor to view activity on IPSec VPN tunnels and start or stop those 
tunnels. The display provides a list of addresses, proxy IDs, and timeout information 
for all active tunnels.

Go to VPN > IPSEC > Monitor.

To interpret the display, see the following sections:

•

•

Select the option to ping the specified destination address using the 

specified source address.

Enter the IP address from which traffic may originate locally.

Enter the IP address of the remote computer to ping.

If you want to generate traffic on a second VPN tunnel simultaneously, 

enter a second IP address from which traffic may originate locally.

Enter the IP address of the second computer to ping