ZyXEL Communications prestige 314 plus Benutzerhandbuch
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch
Internet Access
3-7
Follow the instructions in the following table on how to configure the DHCP fields.
Table 3-3 LAN DHCP Setup Menu Fields
FIELD DESCRIPTION
EXAMPLE
DHCP
This field enables/disables the DHCP server. If it is set to Server,
your Prestige will act as a DHCP server. If set to None, DHCP
service will be disabled and you must have another DHCP sever
on your LAN, or else the workstation must be manually configured.
When DHCP is set to Server, the following four items need to be
set. The Prestige can now also act as a surrogate DHCP server
(Relay) where it relays IP address assignment from the actual real
DHCP server to the clients.
your Prestige will act as a DHCP server. If set to None, DHCP
service will be disabled and you must have another DHCP sever
on your LAN, or else the workstation must be manually configured.
When DHCP is set to Server, the following four items need to be
set. The Prestige can now also act as a surrogate DHCP server
(Relay) where it relays IP address assignment from the actual real
DHCP server to the clients.
Server
(default)
Configuration:
Client IP Pool Starting
Address
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
address pool.
192.168.1.33
Size of Client IP Pool This field specifies the size, or count, of the IP address pool.
32
Primary DNS Server
Secondary DNS
Server
Secondary DNS
Server
Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the
subnet mask. Leave these entries at 0.0.0.0 if a WAN DHCP
server provides them.
passed to the DHCP clients along with the IP address and the
subnet mask. Leave these entries at 0.0.0.0 if a WAN DHCP
server provides them.
DHCP Server Address The Prestige acts as a surrogate DHCP server when you select
Relay from the DHCP field.
This field is N/A when the DHCP field is Server or None.
This field is N/A when the DHCP field is Server or None.
N/A
Follow the instructions in the table shown next to configure TCP/IP parameters for the LAN port.
Table 3-4 LAN TCP/IP Setup Menu Fields
FIELD DESCRIPTION
EXAMPLE
TCP/IP Setup:
IP Address
Enter the IP address of your Prestige in dotted decimal notation
192.168.1.1
(default)
IP Subnet Mask
Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige
255.255.255.0