Namco Bandai Games 90500089 Benutzerhandbuch
Page 11
4-3 Removing the Shipping Bracket
1.
Remove the two Hex Head Set Screws (M8x16) retaining the shipping
bracket to the Cycle Base.
bracket to the Cycle Base.
2.
Remove the two Hex Head Set Screws (M12x20) retaining the shipping
bracket to the Cycle Assembly.
bracket to the Cycle Assembly.
3.
Remove the shipping bracket. (Ensure that the bracket and the M8 screws
and washers are retained safely for refitting if the machine is moved or
transported in the future.)
and washers are retained safely for refitting if the machine is moved or
transported in the future.)
4.
Refit the two Hex Head Screws (M12x20) with washers to the Cycle
Assembly and tighten fully.
Assembly and tighten fully.