Konica Minolta bizhub pro 920 scan um 110 Benutzerhandbuch
7
Using the Network Scanner Features
7-20
bizhub PRO 920 Scanner
7.6
Transmission to a Group
To send the scanned data to a registered Group, follow the steps below.
!
Detail
For more information on how to register a Group, refer to “Registering a
Group” on page 6-13.
Group” on page 6-13.
How to transmit to a group
1
Press the [Scan] on the control panel.
2
Press the [Group] key.
–
In the initial settings, the Select
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your administrator of the copier.
Destinations/Storage Locations
screen (E-Mail) is displayed. For
information on the initial settings
of the Scan screen, contact your administrator of the copier.
3
Press the Name of the destination
Group.
Group.
–
To deselect the Name, press the
selected Name again.
selected Name again.
–
Press the [List] key and then
press the [Group] key to display the list of registered destinations.
press the [Group] key to display the list of registered destinations.
–
Press the [Edit] key on this screen to change what to include in a
Group.
Group.
–
The group which has been selected as the destination cannot be
selected.
selected.
4
Press the [Scan Setting] key.
The Scanner Setting Basic screen
appears.
appears.
5
Configure the necessary items.
–
For more information on the con-
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.
figurations on the Scanner Set-
ting Basic screen, refer to “About
the Scanner Setting Basic
Screen” on page 8-3.