Konica Minolta 7145i gev2 Benutzerhandbuch
13-55
[19] Finisher Adjustment
If optional FS-114 Finisher mounted with SK-114 Saddle kit / PK-114 Punch kit is
installed in your machine, use this mode to make fine adjustments to each function of
the finisher.
installed in your machine, use this mode to make fine adjustments to each function of
the finisher.
Procedure
1 Touch 19. FNS adj. to display the Finisher Adjustment Menu Screen.
2 Touch the desired menu key to display the adjustment screen for each function.
3 Specify the paper size.
2 Touch the desired menu key to display the adjustment screen for each function.
3 Specify the paper size.
Touch upper/lower arrow key to display the desired paper size in the message area.
NOTE:
This paper size setting is not required on the Punch Position Adjustment
Screen.
This paper size setting is not required on the Punch Position Adjustment
Screen.
4 Specify the adjustment value.
Touch +/- to select “+” or “-” as desired, then enter the value using the screen keypad.
Check the entered value and previous value displayed in the upper-left side area.
Check the entered value and previous value displayed in the upper-left side area.
Punch Position Adjustment Screen
Punch Loop Adjustment Screen
System/Copier Setting Menu Screen
Finisher Adjustment Menu Screen
Fold&Stitch Position Adjustment Screen
Fold Position Adjustment Screen
Adjustment Confirmation Screen (Basic Screen)
13
Key Operator
Mode
KRDS Host
Density Shift
Application
Customize
List Print
Memory
Switch
Power Save
Touch Panel
Adjustment
Weekly
Timer
Key Operator
Setting
Panel Contrast
Paper Type
Lock Job
Memory
User
Account
Preset Key
Copier Initial
System Initial
Key Operator
Mode
HDD Setting
Menu
Finisher
Adjustment
Machine Mail
Address