Furuno 1943C Benutzerhandbuch

3. PLOTTER OPERATION 

 

 

The plotter section has eight conditions which generate both audio and visual 
alarms: arrival alarm, anchor watch alarm, XTE (Cross Track Error) alarm, 
proximity alarm, speed alarm, trip alarm, water temperature alarm and bottom 
alarm. (The bottom and water temperature alarms, which require depth and 
water temperature data, may also be set on the sounder alarm menu. For these 
alarms see Chapter 4.) 
 
You may set up the plotter alarms on the ALARM menu, which may be displayed 
by pressing the [ALARM] key. 

EDIT

NEXT
     PAGE

CLEAR
   ALARM

EDIT

NEXT
     PAGE

CLEAR
   ALARM

RETURN

Page 2

Page 1

PREV.
     PAGE

PREV.
     PAGE

AUDIO ALARM 

INTERNAL BUZZ

ARRIVAL ALARM

OFF 0.010nm

ANCHOR WATCH ALARM OFF 0.010nm
PROXIMITY ALARM

OFF  

XTE ALARM

OFF  0.050nm

SPEED ALARM

OFF 

TRIP ALARM

OFF 0000.0nm

ALARM INFORMATION

 

  NO ALARM

BOTTOM ALARM

OFF

TEMPERATURE ALARM

OFF

ALARM INFORMATION
   NO ALARM

 

Audio and visual alarms are released whenever an alarm setting is violated. You 
can enable or disable the audio alarm as follows: 
 
1.  Press the [ALARM] key to show the alarm menu. 
2.  Use the trackball to select AUDIO ALARM. 
3.  Press the EDIT soft key to show the audio alarm window. 

 AUDIO ALARM

¡

INT & EXT BUZZ 

¤

INTERNAL BUZZ  

¡

OFF

 

4.  Use the trackball to select INT & EXT BUZZ (Internal + External alarm), 

INTERNAL BUZZ (Internal alarm) or OFF as appropriate. This turns on or off 
the audio alarm globally for all alarms, including radar. 

5.  Press the ENTER soft key. 
6.  Press the [ALARM] key to finish.