Ferris Industries 5900790 Benutzerhandbuch

Seite von 32
3
GB
Features & Controls
Fuel Tank Shut-Off Valve   
 
(One valve per tank)
The fuel shut off valves are located on the front of the 
propane tanks. Turn the knob CLOCKWISE to close 
the fuel shut off valve.  Turn the knob COUNTER-
CLOCKWISE to open the fuel shut off valve.
When operating the unit, only one fuel tank shut-off 
valve should be open at a time, so that LP gas is only 
drawn from one tank at a time.
The propane tanks are equipped with a excess flow 
valve that will automatically close and stop the flow of 
propane from the tank if the flow of propane exceeds 
the specified rate. 
 Fuel Level Guage
Displays the fuel level in the tank.
FUEL TANK CONTROLS
 Parking Brake 
  
DISENGAGE Releases the parking 
brake.
  
ENGAGE
Locks the parking 
brake.
Pull the parking brake lever back to engage the 
parking brake.  Move the lever fully forward to 
disengage the parking brake.  NOTE: To start the 
unit the parking brake must be engaged.
     
 
 Deck Lift Pedal, Cutting 
Height Adjustment Pin & Deck Lift Lock 
Lever
These control the cutting height of the mower deck.  
Depress the pedal until it locks into the 5” (12,7cm) 
position.  Place the adjustment pin in the desired 
cutting height and release the lift lock lever.
 Hour Meter
The hour meter measures the number of hours the 
PTO has been engaged.  The hour meter has a self 
contained power source so the total hours are always 
visible.
Instrument Control Panel
(S/N: 2014953657 & Above)
Not 
for  
Reproduction