Casio green slim xj-a145v Benutzerhandbuch

Seite von 51
13
Changing the aspect ratio of the projected image
Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image.
Available settings depend on your projector model as shown below. For details about the meaning of 
each setting, see the “Aspect Ratio” setting (page 29) on the “Screen Settings Main Menu”.
XJ-A230V/XJ-A235V/XJ-A240V/XJ-A245V/XJ-A250V/XJ-A255V
Pressing the [ASPECT] key will cycle through settings in accordance with the current input source as 
shown below.
XJ-A130V/XJ-A135V/XJ-A140V/XJ-A145V/XJ-A150V/XJ-A155V
Pressing the [ASPECT] key will toggle between settings in accordance with the current input source as 
shown below.
Note
 When the input source is a component or an HDMI (DTV) signal with an aspect ratio of 16:9, 
the aspect ratio is fixed at 16:9. In this case, pressing the [ASPECT] key will not change the 
aspect ratio setting.
 For details about how the aspect ratio setting affects the projected image, see “Aspect Ratio 
 You also can change the aspect ratio setting using the setup menu. For details, see “Aspect 
Important!
Note that enlarging or reducing the size of an image using the [ASPECT] key for commercial 
purposes or public presentation may infringe on the legally protected copyright of the copyright 
holder of the original material.
Input Source
Pressing [ASPECT] will cycle through these settings:
VIDEO, Component, HDMI (DTV)
Normal  16:9  Letter Box
RGB, HDMI (PC)
Normal  Full  True
Input Source
Pressing [ASPECT] will toggle between these settings:
VIDEO, Component, HDMI (DTV)
Normal  16:9
RGB, HDMI (PC)
Normal  Full