Zebra 49834 Benutzerhandbuch
12
170PAX4 Maintenance Manual
57518L-001 Rev. A
3/18/05
System Description
Front Panel
Front Panel Indicator Lights (LEDs)
.
FEED
Feeds a blank label.
• If the print engine is idle or paused, the label is fed immediately.
• If the print engine is printing, the label is fed after the current batch prints.
CALIBRATE
CALIBRATE
functions only in Pause mode. Press CALIBRATE to recalibrate for
proper media length, to set media type (continuous/non-continuous), and to set print
method (direct thermal/thermal transfer).
method (direct thermal/thermal transfer).
Table 1 • Front Panel Buttons (Continued)
Button
Description/Function
Table 2 • Front Panel Lights
LED
OFF Indicates
ON Indicates
FLASHING Indicates
POWER
(Green)
The print engine is
OFF, or no power
to print engine.
OFF, or no power
to print engine.
Power switch is ON, and power is
being supplied to the print engine.
being supplied to the print engine.
—
PAUSE
(Yellow)
Normal operation.
One of the following:
• The print engine is paused because
of an error condition (printhead,
ribbon, or paper error). Usually
occurs in conjunction with another
LED.
ribbon, or paper error). Usually
occurs in conjunction with another
LED.
• PAUSE was pressed.
• A pause was requested from the
Applicator Port.
• A pause was received as part of
the label format.
—
DATA
(Green)
No data being
received or
processed.
received or
processed.
Data is processing or printing is
taking place. No data is being
received.
taking place. No data is being
received.
The print engine is receiving data
from or sending status information
to the host computer.
from or sending status information
to the host computer.
MEDIA
(Yellow)
Normal operation.
Media properly
loaded.
Media properly
loaded.
Out of media. (print engine is
paused, LCD displays error message,
and PAUSE light is ON).
paused, LCD displays error message,
and PAUSE light is ON).
—
RIBBON
(Yellow)
Normal operation.
Ribbon properly
loaded.
Ribbon properly
loaded.
Ribbon in while print engine is in
direct thermal mode, or no ribbon
loaded while the print engine is in
thermal transfer mode. The print
engine is paused, LCD displays error
message, and PAUSE light is ON.
direct thermal mode, or no ribbon
loaded while the print engine is in
thermal transfer mode. The print
engine is paused, LCD displays error
message, and PAUSE light is ON.
—
ERROR
(Orange)
(Orange)
No print engine
errors.
errors.
—
A print engine error exists. Check
the LCD for status.
the LCD for status.