Zebra 49834 Benutzerhandbuch
System Description
Main Print Engine Assembly Locations
57518L-001 Rev. A
3/18/05
170PAX4 Maintenance Manual
23
Peel Roller Assembly
. The 170PAX4 Series peel roller assembly is located farther away from previous
assemblies, allowing the label sensors to be located closer to the print line. The assembly
consists of a spring-loaded knurled roller in a pivoting frame that can be unlatched to allow
media liner loading.
consists of a spring-loaded knurled roller in a pivoting frame that can be unlatched to allow
media liner loading.
The supported pivoting frame is around inboard and outboard pins. In the latched position, the
knurled roller is in position for the media liner to achieve a wrap angle around the elastomer
peel roller. This increases the driving force on the liner that assists in reducing liner slack and
improves label peeling.
knurled roller is in position for the media liner to achieve a wrap angle around the elastomer
peel roller. This increases the driving force on the liner that assists in reducing liner slack and
improves label peeling.
Figure 6 • Peel Roller Assembly
1
Peel roller assembly
2
Peel roller latch
1
2
1