Zebra 49834 Benutzerhandbuch

34

170PAX4 Maintenance Manual

57518L-001 Rev. A

3/18/05

Unpack and Inspect the Print Engine

When you receive the print engine, immediately unpack and inspect it for shipping damage. 
Save all packing materials.

Inspect the print engine for possible damage incurred during shipment:

•

Check all exterior surfaces for damage.

•

Raise the media door, and inspect the media compartment for damage to components.

If you discover shipping damage upon inspection:

•

Immediately notify the shipping company and file a damage report.

•

Keep all packaging material for shipping company inspection.

•

Notify your authorized Zebra reseller.

If you are not placing the print engine into immediate operation, repackage it using the original 
packing materials. You may store the print engine under the following conditions:

•

Temperature: –40° to 160°F (–40° to 71°C)

•

Relative humidity: 5% to 95% non-condensing

If you must ship the print engine:

•

Remove any ribbon from the spindles to avoid damaging the print engine. 

•

Carefully pack the print engine into the original container or a suitable alternate container 
to avoid damage during transit. A shipping container can be purchased from Zebra if the 
original packaging has been lost or destroyed.

Zebra Technologies Corporation is not responsible for any damage incurred 

during the shipment of the equipment and will not repair this damage under warranty