LaCie 2 Benutzerhandbuch
LaCie Network Space 2
• DESIGN BY NEIL POULTON
Administering Your LaCie Network Space 2
User Manual
page 37
4.6. Dashboard: General Settings
This page allows the administrator to modify some of your Network
Space 2’s general parameters.
Space 2’s general parameters.
Machine Name:
Modify the machine name. The machine name
identifies your Network Space 2 in LaCie Network Assistant and on
the local network. The machine name is limited to 15 characters.
Please use alphanumeric characters without spaces or symbols.
the local network. The machine name is limited to 15 characters.
Please use alphanumeric characters without spaces or symbols.
Date (mm/dd/yy):
Change the date.
Workgroup:
Modify the Windows workgroup name to set your Net-
work Space 2 to belong to a certain workgroup.
TECHNICAL NOTE:
Mac users connected to a network with Win-
dows com puters can also access shares this way by selecting in the
Finder
Finder
Network > [Workgroup] > NetworkSpace2
where “Work-
group” is the name of the Windows workgroup.
Time:
Change the time.
FTP Service:
Toggle this feature on/off to allow your Network Space
2 to be accessible via File Transfer Protocol (FTP).
Time zone:
Change the time zone.
Multimedia Service:
This feature allows your Network Space 2 to act
as a UPnP multimedia server. Files (stored on OpenShare only) will
be available to play on UPnP-enabled players (such as cell phones,
computers, and game consoles). For information on using your
Network Space 2 to stream files to your UPnP devices, see
be available to play on UPnP-enabled players (such as cell phones,
computers, and game consoles). For information on using your
Network Space 2 to stream files to your UPnP devices, see
. For information on using the Network Space 2 as
an iTunes music server, see section
. Note that if you’ve
just added new content to the Network Space 2, it could take a few
minutes before they are available to UPnP/DLNA-certified players/
adapters.
minutes before they are available to UPnP/DLNA-certified players/
adapters.
NTP Server:
Click the box, then click the field to the right and type
the address of a Network Time Protocol server to provide the time
for the Network Space 2 automatically. While NTP is selected, you
can’t modify the time and date settings.
for the Network Space 2 automatically. While NTP is selected, you
can’t modify the time and date settings.
Fig. 53