Newcon Optik lrm1500 Benutzerhandbuch

10 

To install a battery: 


  Slide the battery compartment cover down (9, Fig. 2) 



  Install the battery observing polarity 



  Don’t apply superfluous strength while pushing the battery 

inside the compartment. 



  Close the compartment cover 

If the battery does not fit the compartment easily, it means that 
polarity was reversed 
To take a battery out: 


  Slide the battery compartment cover down (9, Fig. 2) 



  Shake the rangefinder gently towards the open end of the 

battery compartment 



  Pull out the battery 

The unit is fully operational when battery voltage is higher than 
7V. A ‘LOW BATTERY’ warning is displayed when battery 
voltage falls below 7.2V. 
Ni-MH rechargeable or other 9V batteries capable to sustain 
current drain up to 150 mA could be used to power the System.