Lennox eyebrow lintel kit eldv-35 Benutzerhandbuch

Printed in U.S.A. © 2006 by LHP

LHP reserves the right to make changes at any time, without notice, in design, materials, specifi cations, prices and the discontinuance of colors, styles and products. Consult your local 
distributor for fi replace code information.

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

Step 2. Using a 5/16" socket or nutdriver, remove the existing lintel as 

shown in Figure 3.  Retain the screws for Step 3.

Step 3.Install the new lintel provided using the screws that were removed 

in step 2 (reversing instructions in step 2 and see Figure 3).

Step 4. Install the eyebrow as follows:

1. Align the eyebrow provided as shown in Figure 4.  Ensure that 

the eyebrow is pushed in fl ush to the fi replace front.

2. Drill into fi replace through the center hole on eyebrow. 
3. Install a screw (provided) into the center hole on eyebrow into 

hole that you drilled. Repeat this process for the other 2 holes 
on eyebrow using the other 2 screws provided. See Figure 5.

Step 5. Reinstall glass door per instructions in Homeowner's Manual and 

per Step 1 and Figure 1.