Lexmark E352DN Benutzerhandbuch
Printing a network setup page
27
Printing
Printing a network setup page
If the printer is attached to a network, print a network setup page on the printer to verify the network connection. This page
also provides important information that helps in configuring for network printing.
also provides important information that helps in configuring for network printing.
1
Make sure the printer is on and
Ready
appears.
2
From the control panel, press
until
Network
Menu
appears, and then press
.
Standard Network
appears.
3
Press
, and then press
until
Std Net Setup
appears.
4
Press
until
Reports
appears.
5
Press
until
Setup Page
appears, and then press
again.
Busy Network
appears. The indicator light flashes, and the printer prints the page.
6
Press
to return to the
Ready
state.
7
Check the first section on the network setup page, and confirm that Status is “Connected.”
If Status is “Not Connected” the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and print another network setup page to verify that the printer is connected
to the network.
a system support person for a solution, and print another network setup page to verify that the printer is connected
to the network.
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and
Ready
appears.
2
From the control panel, press
until
Utilities
Menu
appears, and then press
.
3
Press
until
Print Fonts
appears.
4
Press
until
List
appears.
The indicator light flashes, and the printer prints the pages.
5
Press
to return to the
Ready
state.