LiftMaster 976lmc Benutzerhandbuch
LIGHT
LIGHT
LIGHT
FEATURES
For use with any SECURITY
✚
®
garage door openers having an
orange “learn” button.
Personalized Password: Up to 10,000 possible combinations.
Password can be easily changed if desired.
Password can be easily changed if desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be limited to a
programmable number of hours or a programmable number of
entries.
persons. This temporary password can be limited to a
programmable number of hours or a programmable number of
entries.
Rolling Code: While your password remains constant until you
change it, the code between the Keyless Entry and the receiver
changes with each use, randomly accessing over 100 billion
new codes.
change it, the code between the Keyless Entry and the receiver
changes with each use, randomly accessing over 100 billion
new codes.
Operation: Opener activates when 4-digit password and Enter
button is pressed.
button is pressed.
If wrong numbers are accidentally pressed, correction can be
made immediately. The Enter button will transmit only the last
four digits.
made immediately. The Enter button will transmit only the last
four digits.
The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.
SETTING THE PERSONAL ENTRY PASSWORD
Model 976LM & 976LMC Security
✚
®
Wireless Keyless Entry
WARNING
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• Install door control within sight of gate or garage door, out of
gate or garage door:
• Install door control within sight of gate or garage door, out of
reach of children at a minimum height of 5 feet (1.5 m), and away
from ALL moving parts of gate or door.
from ALL moving parts of gate or door.
• NEVER permit children to operate or play with gate or door control
push buttons or remote control transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or closing
garage door.
garage door.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
this receiver and/or transmitter are prohibited, except for changing the code setting or replacing
the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
We recommend that you program your password now, before you install the Keyless Entry. Then you can test the reception
at the mounting location before you proceed further.
at the mounting location before you proceed further.
USING THE MULTI-FUNCTION DOOR CONTROL
USING THE “LEARN” BUTTON
9
1
9
1
7
3
7
5
3
5
KG
KG
LOCK
1. Enter a four digit personal identification
number (PIN) of your choice on the keypad.
Then press and hold ENTER.
Then press and hold ENTER.
2. While holding the ENTER button, press and
hold the LIGHT button on the Multi-Function
Door Control.
Door Control.
LOCK
1. Press and release the “learn” button on motor
unit. The learn indicator light will glow
steadily for 30 seconds.
steadily for 30 seconds.
2. Within 30 seconds, enter a four digit personal
identification number (PIN) of your choice on
the keypad. Then press and hold the ENTER
button.
the keypad. Then press and hold the ENTER
button.
3. Continue holding the ENTER and LIGHT
buttons while you press the push bar on the
3. Release the button when the motor unit lights
Multi-Function Door Control (all three buttons
blink. It has learned the code. If light bulbs
are held).
LOCK
are not installed, two clicks will be heard.
4. Release buttons when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
are not installed, two clicks will be heard.
Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and setting
a temporary password.
Entry, changing the personal entry password and setting
a temporary password.
1