Konica Minolta di1610 um 1.0.0 Benutzerhandbuch
Before Making Copies
3
Di1610
3-27
Positioning Books
When copying an open book or magazine, position the original as detailed
below.
below.
1
Raise the Auto Document Feeder or Original Cover.
2
Place the original face down on the
Original Glass.
Original Glass.
Note
Do not place books weighing
more than 3 kg on the Original
Glass. In addition, do not press
down extremely hard on the original, otherwise the machine may
be damaged.
Do not place books weighing
more than 3 kg on the Original
Glass. In addition, do not press
down extremely hard on the original, otherwise the machine may
be damaged.
3
Position the original on the Original
Glass so that the corner of the
original aligns with the arrow in the
upper-left corner of the Original
Scales.
Glass so that the corner of the
original aligns with the arrow in the
upper-left corner of the Original
Scales.
4
Gently lower the Auto Document
Feeder or Original Cover.
Feeder or Original Cover.
Note
While scanning a thick book or other three-dimensional object with
the Auto Document Feeder or Original Cover open, do not look
directly at the bright light that may shine through the Original Glass.
Although the light that shines through the Original Glass is bright, it
is not a laser beam and, therefore, is not as dangerous.
While scanning a thick book or other three-dimensional object with
the Auto Document Feeder or Original Cover open, do not look
directly at the bright light that may shine through the Original Glass.
Although the light that shines through the Original Glass is bright, it
is not a laser beam and, therefore, is not as dangerous.
5
Specify the desired copy settings.
H
6
Press the [Start] key to start the copy cycle.